Key Features
- Measurement of a variety of environmental parameters
- Temperature, Humidity, and Pressure
- Sensor
- BOSCH BME680 Integrated Environmental Unit
- Compact size
- Built-in LoRa® Antenna, swappable battery
- Easy to mount and maintain
- Low power operation
- Standby current of less than 15 uA
- Adjustable sampling and transmission interval
- Battery
- Replaceable 3500 mAh high capacity lithium battery with a battery life of more than 2 years
- LoRaWAN® 1.0.2 fully compliant
Specification
Working Temperature
Parameter
Min
Typical
Max
Operating Temperature
-40„ƒ
+25„ƒ
+85„ƒ
Storage Temperature
-40„ƒ
+25„ƒ
+85„ƒ
Power Consumption
ParameterCurrentUnit
Standby Current<15uA
Current in Sensors Working Mode<10mA
Current in LoRa® Transmission Mode<150mA
Temperature Sensor Specifications
ParameterMinTypicalMax
Temperature Range-40„ƒ+25„ƒ+85„ƒ
Accuracy0.5„ƒ
Output Resolution0.01„ƒ
Humidity Sensor Specifications
ParameterMinTypicalMax
Humidity Range0% r.H100 % r.H.
Accuracy+-3% r.H.
Output Resolution0.008% r.H.
Gas Pressure Sensor Specifications
ParameterMinTypicalMax
Range300 hPa300 hPa
Accuracy+-0.6 hPa
Output Resolution0.18 Pa.
IAQ Sensor Specifications
ParameterMinTypicalMax
IAQ Range0500
Accuracy15
Output Resolution1
Power Supply Battery Specifications
ParameterMaxUnit
Nominal Battery Voltage3.6V
Battery SpecificationER18505
Nominal Capacity3500mAh
Temperature Range-55~85ºC
Battery Dimensions18*50.5mm
Note :
1. The included battery is non-rechargeable. In case you need to plug in the Micro USB port for the purpose of configuring the node, the battery should stay plugged.
2. The pin distance of the battery connector is 2.0mm. When choosing a battery, attention should be paid to the consistency of positive and negative poles. Reverse connections or short circuits may damage the device and may cause overheating and combustion of the battery. Therefore, when replacing the battery, it is necessary to strictly confirm whether the positive and negative poles of the connector are correct.